OXE 300 HP Jet-Tech Outboard Diesel Engine – Sale !!

The OXE300 is a bi-turbo, diesel configuration that provides its full 680Nm (502ft-lb) of torque at the crankshaft already at 1750rpm, at 1000rpm the engine provides over 500Nm (369ft-lb) at the crankshaft. These are torque numbers that were previously unheard of in the outboard industry and provide the user with massive bollard pulling power, as well as fast-hole shot acceleration.

PERFORMANCE

LONG RANGE AND GREAT FUEL ECONOMY

Due to a significantly lower fuel consumption than a leisure outboard, the OXE Diesel offers the user unprecedented range. The fact that OXE Diesel runs on diesel gives the user the ability to refuel from larger diesel-powered vessels or marine-based platforms that further increase the versatility. This greatly increases operational runtimes for operators who predominantly use diesel as the main fuel. The OXE Diesel also has great fuel economy and uses 46% less fuel than a modern, leisure, gasoline outboard.

POWER AND VERSATILITY

The powerful high torque of the 6 cylinder Bi-turbo diesel engine manifests itself throughout the OXE300. Together with the modular design and robust transmission, it provides the users with reliable options to use the engine as both a powerful workhorse and a high-speed solution.

Diesel provides for high efficiency and torque. It gives increased load capacity and greatly reduced fuel consumption compared to gasoline, increasing the range by up to 87%.

ENVIRONMENTAL BENEFITS

Reduced CO2 emissions
The reduced fuel consumption is a key factor to why the OXE Diesel engine emits significantly lower CO2 than a gasoline outboard engine. One liter of diesel produces approximately 2.69kg CO2 and one liter of gasoline produces 2.36kg CO2 when ignited. Since the OXE Diesel consumes up to 46% less fuel than comparable gasoline alternatives, the OXE Diesel reduces CO2 emissions by over 35.5%.

When fueled with BioDiesel, OXE300 reduce net CO2 by up to 94.2% compared to gasoline outboards.

Reduced CO emissions
Just as with CO2, the reduced fuel consumption is a key factor to why the OXE Diesel engine emits significantly lower CO when comparing the OXE Diesel to pleasure craft gasoline outboards. The much stricter directives that exist in the automotive industry, such as for example the EPA Tier III regulations, have directly benefitted the OXE Diesel engine since its powerhead is derived from the automotive industry. In accordance with EPA Tier III, one litre of diesel should only emit 8.36g while the non-regulated gasoline engines can emit up to 620g/l.

Reducued HC and NOx emissions
Lower fuel consumption means that the OXE Diesel engine emits significantly lower HC and NOx than gasoline outboard engines. One liter of diesel produces approximately 17.8g of HC NOx when ignited, compared to 33.4g of HC NOx for one liter of gasoline.

Since the OXE Diesel consumes up to 42% less fuel than comparable gasoline alternatives, the OXE Diesel reduces the HC NOx emissions by up to 69.8%.

WHY JET-TECH?

Developed especially to endure the high torque of OXE outboard engines, JET-TECH technology delivers 100% of engine horsepower as water jet propulsion.

SHAFT FREE
Forward-facing impeller allows performance equal to or better than a standard propeller.

PLUG-N-PLAY
A direct bolt-on plug-and-play replacement to the OXE Diesel lower unit.

HIGH TORQUE
Retains the high torch produced by the patented OXE Diesel belt drive.

Safer for the marine environment, and you.

A waterjet substitutes the propeller, eliminating the risk of the propeller hitting rocks, the ocean floor or injuring animals or humans swimming close by the boat.

Technical Data OXE 300 HP Jet-Tech

Engine type:     Diesel, L6
Displacement:     3.0 L
Intake:     Turbocharged, inter-cooled
Torque:     680 Nm (501ft-lb) at 1750 RPM
Power:     300 HP at 4200 – 4400 RPM
Fuel:     Diesel
EN 590, ASTM D 975 No.1
No.2. JIS KK2204, F54 & F75
Weight:     395 kg
Alternator output:     180 Amp
Rig length:     25” or 33”
Cooling:     Closed cooling circuit
Starting:     Electric
Steering option:     Hydraulic, Electronic Power Steering, Joystick
Shiſt:     CANbus, Electro-hydraulic
Clutch:     Hydraulic multi-friction plate
Gear ratios:     1.39:1
Dimensions (XL 25” leg/ XXL 33″ leg), LHW     XL, 1150x2090x700mm. XXL, 1150x2293x700mm (CC32″)

 OXE 300 HP Jet-Tech Outboard Diesel Engine – Sale !!